Thursday, August 30, 2012
Wednesday, August 29, 2012
Control of Gene Expression - part 1
Attenutation = Premature termination of transcription.
Tat-Tar gene regulation in HIV:
Normally, in host cell, transcription of HIV virus will be terminated by host cell to prevent trascription occur. To avoid this, HIV transcribes a Tat protein that binds to the stem loop Tar on RNA sequence of HIV, allows for elongation of mRNA to be made.
Riboswitch :
It is a part of mRNA that can "sense" small molecules in which binding of these small molecules will affect the gene activity. Riboswitch often can be divided into 2 parts: one is aptamer which binds the small molecules that regulates gene expression, and the other is platform that responses upon the conformation change based on the interaction of small molecules with aptamers.
Alternative RNA splicing:
This is one form of control transcription based on alternative of splicing. There are 4 patterns of alternative RNA splicing: option exon, optional intron, mutually exclusive exons and internal splice site. Because of this mechanism, even with a small amount of genes in cell can express million different proteins based on the stimulation under some certain conditions. This alternative splicing can be controlled in many different ways. Many distinct ways to control and alternate RNA splicing includes the intron sequence ambiguity, regulated splicing ( involve both repressor and activator), change in the site of RNA trasnscript cleavage.
Intron sequence ambiguity:
the standard spliceosome mechanism for removing intron sequences is unable to distinguish clearly between two or more alternative pairing of 5' and 3' splice site, so that different choices are made by chance on different transcripts that occurs on transcriptional level.
Regulated splicing:
Splicing is controlled by both repressor and activator at the trancriptional level.
A change in the site of RNA transcript cleavage:
While transcribing to synthesize new RNA, for somehow, the elongation can be controlled by RNA cleavage reaction that is catalyzed by additional factors and results different size of RNA strand and alternate the C-terminus of the resultant protein. During the 3' end cleavage for additional pol A tail, the factor CPSF will recognize the cleavage site, allowing for pol A tails to be added. However, in some certain circumstances, CPSF might recognize different cleavage site, and results different size of mature mRNA.
For example: B-cell switches from anchored Ab to secreted Ab. Note that anchored Ab has hydrophobic sequence at C-terminal that allows it to anchor into cell membrane while secreted Ab does not have hydrophobic sequence. Also, that anchored Ab has a longer sequence than secreted Ab due to the cleavage process.
RNA editing:
this mechanism alters the nucleotide sequences of RNA transcripts once the are synthesized and thereby changes the coded message. This process involves guide RNA ( that is complementary in sequence to one end of the region of the transcript to be edited) or deamination of nucleotides ( change from A to I or C to U).
If the edit occurs in a coding region, it can change the amino acid sequence of the protein or produce a truncated protein.
If edits occur outside the coding sequences, it can affect the pattern of pre-mRNA splicing, the transport of mRNA from the nucleus to cytosol, or efficiency of RNA being translated.
Tat-Tar gene regulation in HIV:
Normally, in host cell, transcription of HIV virus will be terminated by host cell to prevent trascription occur. To avoid this, HIV transcribes a Tat protein that binds to the stem loop Tar on RNA sequence of HIV, allows for elongation of mRNA to be made.
Riboswitch :
It is a part of mRNA that can "sense" small molecules in which binding of these small molecules will affect the gene activity. Riboswitch often can be divided into 2 parts: one is aptamer which binds the small molecules that regulates gene expression, and the other is platform that responses upon the conformation change based on the interaction of small molecules with aptamers.
Alternative RNA splicing:
This is one form of control transcription based on alternative of splicing. There are 4 patterns of alternative RNA splicing: option exon, optional intron, mutually exclusive exons and internal splice site. Because of this mechanism, even with a small amount of genes in cell can express million different proteins based on the stimulation under some certain conditions. This alternative splicing can be controlled in many different ways. Many distinct ways to control and alternate RNA splicing includes the intron sequence ambiguity, regulated splicing ( involve both repressor and activator), change in the site of RNA trasnscript cleavage.
Intron sequence ambiguity:
the standard spliceosome mechanism for removing intron sequences is unable to distinguish clearly between two or more alternative pairing of 5' and 3' splice site, so that different choices are made by chance on different transcripts that occurs on transcriptional level.
Regulated splicing:
Splicing is controlled by both repressor and activator at the trancriptional level.
A change in the site of RNA transcript cleavage:
While transcribing to synthesize new RNA, for somehow, the elongation can be controlled by RNA cleavage reaction that is catalyzed by additional factors and results different size of RNA strand and alternate the C-terminus of the resultant protein. During the 3' end cleavage for additional pol A tail, the factor CPSF will recognize the cleavage site, allowing for pol A tails to be added. However, in some certain circumstances, CPSF might recognize different cleavage site, and results different size of mature mRNA.
For example: B-cell switches from anchored Ab to secreted Ab. Note that anchored Ab has hydrophobic sequence at C-terminal that allows it to anchor into cell membrane while secreted Ab does not have hydrophobic sequence. Also, that anchored Ab has a longer sequence than secreted Ab due to the cleavage process.
RNA editing:
this mechanism alters the nucleotide sequences of RNA transcripts once the are synthesized and thereby changes the coded message. This process involves guide RNA ( that is complementary in sequence to one end of the region of the transcript to be edited) or deamination of nucleotides ( change from A to I or C to U).
If the edit occurs in a coding region, it can change the amino acid sequence of the protein or produce a truncated protein.
If edits occur outside the coding sequences, it can affect the pattern of pre-mRNA splicing, the transport of mRNA from the nucleus to cytosol, or efficiency of RNA being translated.
Tuesday, August 28, 2012
Indirect ELISA
Wash solution: is used to wash the unbound materials
Stop solution: as for the second antibody that coupled with the enzyme-labelled conjugation. This enzyme will be bound with reagent ( normally added in the end) to cause color development. The color is directly proportional to the amount of bound antibody-antigen interactions. Thereby, the stop solution is used to stop the enzyme-substrate reaction and allows for color to develop.
Friday, August 24, 2012
The relationship between bacteriophage and host polymerase for the transcription of its own gene
Since this process is very complex, I will simplify this mechanism
- Normally, bacteriophage does not encode its own RNA pol, so it must rely on the host RNA pol to transcribe its gene.
- Transcription from early bacteriophage promoter is initiated by the host holoenzyme containing the host sigma factor.
- There will be a competition for host sigma factor to bind with between bacteriophage promoter and host promoter. In this case, if bacteriophage wants host holoenzyme binds it promoter, it must make sure that its promoter must be strong ( meaning that it must have high affinity for host holoenzyme).
- When this process is accomplished, this transcription produces viral sigma factor. This viral sigma factor will steal RNA pol from host to synthesize its own gene and a new sigma factor ( let just denote as sigma *.
- The second sigma factor ( sigma*) will again bind to host RNA pol for its transcription to generate other part of viral structure like capsid.
- Note: always, there will be a competition for the binding of host holoenzyme between viral promoters and host promoter, as well as viral sigma factor with the new viral sigma factor*. This process totally is dependent on affinity of the molecular interactions.
- Normally, bacteriophage does not encode its own RNA pol, so it must rely on the host RNA pol to transcribe its gene.
- Transcription from early bacteriophage promoter is initiated by the host holoenzyme containing the host sigma factor.
- There will be a competition for host sigma factor to bind with between bacteriophage promoter and host promoter. In this case, if bacteriophage wants host holoenzyme binds it promoter, it must make sure that its promoter must be strong ( meaning that it must have high affinity for host holoenzyme).
- When this process is accomplished, this transcription produces viral sigma factor. This viral sigma factor will steal RNA pol from host to synthesize its own gene and a new sigma factor ( let just denote as sigma *.
- The second sigma factor ( sigma*) will again bind to host RNA pol for its transcription to generate other part of viral structure like capsid.
- Note: always, there will be a competition for the binding of host holoenzyme between viral promoters and host promoter, as well as viral sigma factor with the new viral sigma factor*. This process totally is dependent on affinity of the molecular interactions.
Thursday, August 23, 2012
Holliday junction
-First, the homologous chromosomes are both nicked at identical locations.
-Then, the strand from on side of the nicks invade and base-pairs with the other homologous complementary strand.
-The invading strand is covalently linked to the original strand at the nick site, forming Holiday junctions.
- The Holiday junction migrates away from the original nick sites in which this is called branch-migration.
- As it does so, the DNA strands are swapped between the chromosomes. This creates the heteroduplex regions on both chromosomes where minor base sequence differences between homologous chromosomes result a region of DNA with low percent of mismatches base-pairs.
Now, what happens if cleavage happens? To answer this, there are 2 ways that they can happen
1/
- At some point of the branch migration process, breaks are made in the DNA that end the migration and resolves the entangles DNA into two separate chromosomes. This results both non-recombinant chromosomes and recombinant chromosomes. If cleavage takes place at the cross-strands by endonuclease, then after the ligation within chromosomes, there will be two non-recombinant chromosomes with short heteroduplex regions.
2/
- Alternatively, if one rotates one DNA helix 180o ( a process called isomerization), and if the cleavage takes place between uncross strands by endonuclease, ligation can produce recombinant chromosomes with short heteroduplex regions.
-Then, the strand from on side of the nicks invade and base-pairs with the other homologous complementary strand.
-The invading strand is covalently linked to the original strand at the nick site, forming Holiday junctions.
- The Holiday junction migrates away from the original nick sites in which this is called branch-migration.
- As it does so, the DNA strands are swapped between the chromosomes. This creates the heteroduplex regions on both chromosomes where minor base sequence differences between homologous chromosomes result a region of DNA with low percent of mismatches base-pairs.
Now, what happens if cleavage happens? To answer this, there are 2 ways that they can happen
1/
- At some point of the branch migration process, breaks are made in the DNA that end the migration and resolves the entangles DNA into two separate chromosomes. This results both non-recombinant chromosomes and recombinant chromosomes. If cleavage takes place at the cross-strands by endonuclease, then after the ligation within chromosomes, there will be two non-recombinant chromosomes with short heteroduplex regions.
2/
- Alternatively, if one rotates one DNA helix 180o ( a process called isomerization), and if the cleavage takes place between uncross strands by endonuclease, ligation can produce recombinant chromosomes with short heteroduplex regions.
Wednesday, August 22, 2012
A big guy in Virology ! ( Source from actual Jack Johnson lab)
Oh I can say .... WOW
NAME | POSITION TITLE | |||
John E. Johnson | Professor, Dept. of Molecular Biology | |||
EDUCATION/TRAINING | ||||
Carthage College, Kenosha, WI | B.A. | 1967 | Chemistry | |
Iowa State University, Ames, IA | Ph.D. | 1972 | Physical Chemistry | |
Purdue University, W. Lafayette, IN | Post Ph.D. | 1972-1975 | Virus Crystallography |
Positions and Employment | ||
1972-1975 | Postdoctoral Research Associate, Dept. of Biological Sciences, Purdue University, W.Lafayette, IN. | |
1975-1977 | Visiting Assistant Professor, Department of Biological Sciences, Purdue University, W.Lafayette, IN. | |
1978-1981 | Assistant Professor, Department of Biological Sciences, Purdue University, W.Lafayette, IN. | |
1981-1985 | Associate Professor, Department of Biological Sciences, Purdue University, W.Lafayette, IN. | |
1985-06/30/1995 | Professor, Department of Biological Sciences, Purdue University, W.Lafayette, IN. | |
07/01/1995-Present | Professor, Department of Molecular Biology, The Scripps Research Institute, La Jolla, CA. | |
01/01/1986-07/31/1986 | Visiting Professor, Institute Biologie Moleculaire et Cellulaire, Strasbourg, France. | |
01/01/1993-07/31/1993 | Visiting Member, The Scripps Research Institute, La Jolla, CA. | |
07/01/1998-Present | Adjunct Professor, University of California, San Diego, La Jolla, CA. | |
12/2010-Present | Eldon R. Strahm endowed chair in Structural Virology | |
Other Experience and Professional Memberships | ||
1985-1989 | Member, National Institutes of Health Biophysical and Biochemical Study Section. | |
1989 | Purdue Chapter Sigma Xi Faculty Research Award Recipient | |
1991-Present | Board of Governors, Consortium for Advanced Radiation Sources, University of Chicago. | |
1994-1998 | Board of Scientific Councilors, National Cancer Institute, Frederick, MD. | |
1996-2002 | Board of Scientific Councilors: NIAMS (Arthritis, Muscoloskeletal and Skin Diseases). | |
1999-Present | Scientific Advisory Board (Chairman) NIGMS/NCI Synchrotron Beamline Development. | |
2000-2005 | Scientific Advisory Board Finnish National Science Academy. | |
1998-Present | Scientific Advisory Board Donald Danforth Plant Science Center, St. Louis, Missouri. | |
2004-Present | Scientific Advisory Board International Society for Nanoscale Science, Computation and Engineering. | |
2007-Present | Scientific Advisory Board NIH National Resource for Automated Molecular Microscopy (NRAMM) | |
2007-Present | Scientific Advisory Board Institute for Protein Research, Osaka University, Osaka, Japan | |
2008-2010 | Scientific Advisory Board European Structural Biology Consortium (SPINE II) | |
2010-2013 | Scientific Advisory Board National Biomedical Computation Resource UCSD | |
2010-2013 | Proposal Review Panel Linac Coherent Light Source (LCLS) Stanford | |
1994-1998 | International Committee on Taxonomy of Viruses. | |
1998-Present | Editorial Board, Virology. | |
1992-1998 | Editorial Board, Biophysical Journal. | |
1998-2003 | Editorial Board, Journal of General Virology. | |
1998-Present | Editorial Board, Structure. | |
1998-Present | Editorial Board, Journal of Molecular Recognition. | |
2002-2005 | Editorial Board, Journal of Structural Biology. | |
2002-2012 | MERIT award NIGMS GM34220-19. | |
6/2002 | Co Organizer (with Margaret Killian) FASEB Virus Assembly Meeting, Saxtons River VT. | |
1/5/2000-1/20/2000 | Travel fellowship/lectureship Japanese Society for the Promotion of Science. | |
1/7/2001-1/23/2001 | Travel fellowship/lectureship Taiwan National Science Committee. | |
10/1/2003-10/30/2003 | Visiting Lecturer National University of Singapore. | |
1996 | Kaesberg Lecturer, American Society for Virology Annual Meeting, London, Ontario. | |
3/2004 | Mathers Lecturer, Department of Chemistry, University of Indiana, Bloomington. | |
4/2004 | Colter Lecture, Department of Biochemistry, University of Alberta, Edmondton, Alberta. | |
7/2004 | Keynote (Harold S. Ginsberg) Lecture, American Society for Virology Annual Meeting, Montreal, Quebec. | |
3/2006 | Frank Nelson Distinguished Lecturer, Montana State University, Bozeman. | |
2007 | Carthage College Distinguished Alumnus | |
2008 | American Chemical Society (San Diego Section) Distinguished Scientist | |
2009-2012 | Appointed to the Council of The National Institute of General Medical Sciences NIH | |
Patents | ||
11/1996 | Modified Plant Viruses as Vectors European Patent No. 92 907 583.6. | |
2/1998 | Modified Plant Viruses as Vectors US Patent, approved/No.: pending. | |
2007 | Dow Chemical Co.Global Innovator Award (US patent 7,208,655) |
Surface plasmon resonance method
Principle:
This sensitive technique provides the information of the binding interactions between an injected analyte and an immobilized biomolecule in real time without the presence of a non-invasive, label means. As the analyte binds to the immobilized particle, this forms an associated increase in mass that proportionally increases in refractive index which is observed as a shift in the resonance angle. A flow injection analysis configuration is commonly employed in which the analyte of interest, solvated in a buffer solution, is transported across the sensing surface, where it interacts with the immobilized biomolecule. When combined with appropriate surface chemistry, microfluidics and software, this technique can be used in many applications including:
• Affinity analysis
• Kinetic analysis
• Concentration assays
• Active concentration assays
• Binding stoichiometry
• Thermodynamic analysis
• Study of interaction mechanisms
• Dependence of interaction on environmental conditions
• Routine screening
• Ligand-fishing
• Epitope mapping
This sensitive technique provides the information of the binding interactions between an injected analyte and an immobilized biomolecule in real time without the presence of a non-invasive, label means. As the analyte binds to the immobilized particle, this forms an associated increase in mass that proportionally increases in refractive index which is observed as a shift in the resonance angle. A flow injection analysis configuration is commonly employed in which the analyte of interest, solvated in a buffer solution, is transported across the sensing surface, where it interacts with the immobilized biomolecule. When combined with appropriate surface chemistry, microfluidics and software, this technique can be used in many applications including:
• Affinity analysis
• Kinetic analysis
• Concentration assays
• Active concentration assays
• Binding stoichiometry
• Thermodynamic analysis
• Study of interaction mechanisms
• Dependence of interaction on environmental conditions
• Routine screening
• Ligand-fishing
• Epitope mapping
From RNA to translation - special features
The scanning
model and the Kozak consensus sequence and how it influences initiation of
translation in eukaryotes
Ribosomes enter
at the 5’end of the mRNA and scan down the RNA to look for the first AUG codon
that is in “good context.” The nucleotides that influence initiation are A/G at
-3 and G at +4.
Diagram the
features of a sequence that facilitates ribosomal frame-shifting in Eukaryotes (only)
RNA synthesis and Processing
The
differences in transcription elongation of prokaryotes and eukaryotes
Eukaryotes:
-
Transcription
elongation in eukaryotes is tightly coupled to RNA processing.
-
The
RNA splicing removes intron sequences from newly transcribed pre-mRNA and join
the exons (coding regions) together.
-
The
splicing process of RNA is catalyzed by spliceosome. Sometimes, alternative splicing
happens, allows differential expression of exons .
-
The
mRNa is capped and polyadenylated in the nucleus and then exported to the
cytoplasm for translation.
-
The
nucleolus is a ribosome-producing factory.
-
Bote:
although intron will be removed during the process of splicing, but it is very
important because it controls many process in transcription.
Prokaryotes:
-
Both
transcription and translation occur in the same compartment. There are no
introns to splice out and the mRNA is not capped or polyadenylated.
The
sequence required for intron removal in eukaryotic RNA and the 3 major steps in the RNA splicing reaction
-
In
the mRNA strand, especially in the intron sequence, the adenine initiates its
attack on 5’ splice site (the upstream of the intron sequence).
-
3’-OH
of upstream exon reacts with 5’ of the downstream exon.
-
Exons
are joined, and the lariat is released.
-
In
the intron, the 5’ upstream has GU invariant bases while the 3’downstrem has AG
invariant bases
The
major steps in generating the 3’ end of eukaryotic mRNA
As RNA pol II
reaches the end of a gene, the position of the 3’end of each mRNA molecule is
ultimately specified by a signal encoded in the genome. These signals are transcribed
into RNA as the RNA pol II moves through them, and they are then (as RNA) by a
series of RNA-binding proteins and RNA-processing enzymes.
Two multisubunit proteins, CPSF and CstF are part of the RNA pol tail,
and then transferred to the 3’end processing sequence on the RNA.
Once these
proteins bind to the specific nucleotides, additional proteins assemble with
them to create the 3’end of the mRNA. First, the RNA is cleaved. Next poly-A
pol enzymes adds, one at a time, nucleotides to the 3’end produced by the
cleavage without the requirement of template ( Note that: poly-A pol is not
directly encoded in the genome).
As the poly-A
tail is synthesized, proteins called poly-A-binding protein assemble onto the
poly-A tail and remain their bound to direct mRNA to travel from the nucleus to
cytosol as well we the synthesis of a protein on the ribosome.
Some of random questions for science
Assuming
that there were no time constraints on replication of the genome of a human
cell, what would be the minimum number of origins that would be required? If replication had to be accomplished in an
8-hour S phase and replication forks moved at 50 nucleotides/second, what would
be the minimum number or origins required replicating the human genome? (The
human genome comprises a total of 6.4 X 109 nucleotides on 46
chromosomes).
Number
of nucleotides to fully replicate in 8 hr:
50 (nucleotide/sec ) × 8hr × 3600
sec * 2= 2880000 nucleotides for 1
origin
Number
of origins required to replicate the human genome:
6.4×109 / 2880000 = 2222
origins
Explain
the following: Spontaneous depurination
and removal of a deaminated C by uracil DNA glycosylase both leave an identical
intermediate, which is the substrate recognized by AP endonuclease.
Ans: both
spontaneous depurination formed by spontaneous hydrolysis and removal of a
deaminated C by uracil DNA glucosylase resulted an identical intermediate which
is the phosphate sugar backbone, thus one strand of DNA helix has a missing
base. This missing base is recognized by AP endonuclease and phhosphodiesterase
that cleaves the sugar-phosphate group which is absent of a nitrogen base and
fill the gap by DNA polymerase and ligation.
A
particular 225-bp segment of human DNA was used to assemble nucleosomes and
then digested with micrococcal nuclease. Next, the reaction mixture was
extracted to remove proteins, leaving only the DNA for subsequent analysis.
This resulted in a quantitative yield of DNA fragments 146-bp in length.
Explain this result.
When
a segment of human DNA is used to assemble nucleosomes, parts of the DNA strand
wrap around the histone complex to form the nucleosome. Each nucleosome is
linked together by the same DNA strand.
From the previous statement above, the treatment with micrococcal
nuclease results the break of DNA linkage which connected nucleosomes together.
Now, only nucleosomes are present but they do not connect to each other.
Extraction to remove proteins will leave only the DNA segment which the segment
that associates with histone complex. Thus, after treatment, the DNA fragment
only has 146 bp in length rather than 225 bp. The missing base pairing can only
be found from the other DNA fragments that belong to DNA linkage which is
digested with micrococcal nuclease at the beginning.
Subsequent digestion of these fragments with a restriction enzyme that cuts
once within the original 225-bp sequence produced two well-defined bands at 37
and 109 bp. Why do you suppose two well-defined fragments were generated by
restriction digestion, rather than a range of fragments of different sizes?
Restrictive
enzyme is the special enzyme that binds at certain site (which is known as
restriction site), and cleaves the DNA ino 2 specific fragments rather than
multiple fragments catalyzed by common nuclease. Thus, in this case, only 2
fragments are expected to be present.
Cre
recombinase is a site-specific enzyme that catalyzes recombination between two
LoxP DNA recognition sequences. Cre
recombinase pairs two PoxP sites in the same orientation, breaks both duplexes
at the same point within the LoxP sites, and joins the ends with new partners
so that each LoxP site is regenerated. Predict the rearrangement of sequences
that will be generated by Cre-mediated site-specific recombination for each of
the two DNAs shown below.(draw one picture for each DNA).
You
hypothesize that in order for new histone subunits to be incorporated into
chromatin after DNA replication or repair, histone H3 must be able to be
phosphorylated at serine 10. Describe a
possible approach to test your hypothesis.
To test this
hypothesis, first of all phosphorylated of the histone H3 and then let this
histone H3 incorporate into chromatin where it associates with other histones
and DNA strand. When H2A. H2B, H3 and H4 associates together with DNA strand,
this complex will be called nucleosome where each nucleosome connects to each
other by DNA strand. Using micrococcal nuclease is to digest the DNA linkage,
that leaves the nucleosome. Extraction of proteins from the nucleosome is then
used to measure the amount of proteins.
Apply the same
step above with histone without phosphorylation is used as a control to compare
the level of proteins present from nucleosome after phosphorylation. If
phosphorylated H3 actually incorporates into the chromatin, the level of
proteins present in nucleosome will be greater; otherwise, if the level of
proteins present in nucleosome will low, this indicates that phosphorylated
histone H3 cannot incorporate into chromatin.
You
suspect that exposure of a cancer cell line to a specific chemotherapeutic drug
is causing DNA double-strand breaks in these cells. You want to determine whether the cancer
cells activate the DNA repair process.
Describe one possible experiment you could do to determine if this is
true.
At the end of
replication, to protect the end of DNA strands, telomerase must be induced to
generate telomere sequence. Thus, in the cancer cell, the level of telomerase
is highly greater comparing to the normal cell because cancer cell is immortal.
Measurement of the telomerase level will indicate whether cancer cell is still
active or inactive by extraction of telomerase before and after
chemotherapeutic. If the level of telomerase declines, this means that most of
cancer cell is killed; otherwise, if the level of
telomerase is still the same, this suggests that this chemotherapeutic is
failed.
Transposable elements make up over 40% of the human genome, and are inserted
more or less randomly throughout the human genome, with a few exceptions. Some of these exceptions include the Hox
clusters of genes. Shown in the figure
are examples of two human genomic regions.
The top region codes for part of one of the human Hox clusters, the HOXA
cluster. Shown is the region coding for
HOXA4, A5, A6, A7, A10, A11, A13 (there is no HOXA8 or A12). The bottom region is that which codes for the
MLL gene on chromosome 11. The dark
rectangles on the mRNA lines indicate exons.
The locations of repeat sequences within both gene regions are shown as
vertical lines (as indicated by SINE, LINE, LTR, which are examples of types of
repeat sequences). The appropriate differential
expression of the Hox genes along the anteroposterior axis of the developing
embryo establishes the basic body plan for humans (and for other animals). This is a very highly regulated process, with
critical timing for when the individual genes in the cluster get turned on or
off, and to what level and where they are expressed. One Hox cluster located on chromosome 2 is
comprised of 9 genes and covers about 100 kb of DNA (only about 10 kb of this
DNA codes for the Hox proteins.
Why do
you suppose that transposable elements are so rare in the Hox cluster as
compared to other regions? HOXA4 through HOXA13
From the figures
of both Hox cluster gene and MLL gene and based on the presence of LINE and
SINE sequence, this indicates that Hox gene is located at the unique sequence
while MLL gene is located at the repeat sequence. In nature, only transposon
elements can be found in repeat sequence region on chromosome. In fact, the
unique sequence region only contains protein-coding region ( a small portion of
sequence found in unique sequence) for protein expression. Thus, this is the
reason to explain why Hox cluster gene do not show a lot transposable elements
in its DNA sequence.
Simple idea for extraction nucleic acids from cell
Principle methods for extraction of nucleic acids from cell
Cell is cultured and harvested
Lyse cell will detergent to disrupt membrane and inactivate nuclease
Using phenol to seperate nucleic acids from proteins ( Note: proteins will be precipitated while nucleic acids remain in aqueous phase)
Separation of DNA from RNA is based on its solubility in alcoohol
Using DNase or RNase to remove the nucleic acids that is not necessary
Cell is cultured and harvested
Lyse cell will detergent to disrupt membrane and inactivate nuclease
Using phenol to seperate nucleic acids from proteins ( Note: proteins will be precipitated while nucleic acids remain in aqueous phase)
Separation of DNA from RNA is based on its solubility in alcoohol
Using DNase or RNase to remove the nucleic acids that is not necessary
Tuesday, August 21, 2012
Blocking buffer
Before using antibodies to detect proteins that have been dotted or transferred to a membrane, the remaining binding surface must be blocked to prevent the nonspecific binding of the antibodies. Otherwise, the antibodies or other detection reagents will bind to any remaining sites that initially served to immobilize the proteins of interest. In principle, any protein that does not have binding affinity for the target or probe components in the assay can be used for blocking. In practice, however, certain proteins perform better than others because they bind to the membrane or other immobilization surface more consistently or because they somehow stabilize the function of other system components. In fact, no single protein or mixture of proteins works best for all Western blot experiments, and empirical testing is necessary to obtain the best possible results for a given combination of specific antibodies, membrane type and substrate system.
Blocking Nonspecific Sites
The membrane supports used in Western blotting have a high affinity for proteins. Therefore, after the transfer of the proteins from the gel, it is important to block the remaining surface of the membrane to prevent nonspecific binding of the detection antibodies during subsequent steps. A variety of blocking buffers ranging from milk or normal serum to highly purified proteins have been used to block free sites on a membrane. The blocking buffer should improve the sensitivity of the assay by reducing background interference and improving the signal to noise ratio. The ideal blocking buffer will bind to all potential sites of nonspecific interaction, eliminating background altogether without altering or obscuring the epitope for antibody binding.
The proper choice of blocker for a given blot depends on the antigen itself and on the type of detection label used. For example, in applications where alkaline phosphatase conjugates are used, a blocking buffer in TBS should be selected because PBS interferes with alkaline phosphatase. For true optimization of the blocking step for a particular immunoassay, empirical testing is essential. Many factors, including various protein:protein interactions unique to a given set of immunoassay reagents, can influence nonspecific binding. The most important parameter when selecting a blocker is the signal:noise ratio, measured as the signal obtained with a sample containing the target analyte, as compared to that obtained with a sample without the target analyte. Using inadequate amounts of blocker will result in excessive background staining and a reduced signal:noise ratio. Using excessive concentrations of blocker may mask antibody:antigen interactions or inhibit the marker enzyme, again causing a reduction of the signal:noise ratio. When developing any new immunoassay, it is important to test several different blockers for the highest signal:noise ratio in the assay. No single blocking agent is ideal for every occasion since each antibody-antigen pair has unique characteristics.
Subscribe to:
Posts (Atom)